Steel Shots and Steel Grits

We have developed products for very general shot blasting applications in foundries, forging, fabrication, investment castings, aluminum die castings and more. If we use any abrasive in isolation, it is bound to have its limitation; therefore we offer a premix of 2-3 abrasives depending on its application.

Comparison of SS Shot SS-304, SS-202, SS-430, Steel Shot, High and Low Carbon Steel Wire Shot

Particulars for Steel Grades	Stainless Steel Shot 304 Grade Specification	Stainless Steel Shot 302 Grade Specification	Stainless Steel Shot 430 Grade Specification	Steel Shot Specification	High Carbon Steel Cut Wire Shot	Low Carbon Cut Wire Shot
Hardness	44-55 HRC / 400-590 HV	44-55 HRC / 400-590 HV	32 HRC / 700HV Min	40-49 HRC / 400-580 HV	45-52 HRC / 450-550 HV	17-22 HRC / 170-200 HV
Chemical Composition	Nickel: 8-10% Carbon: 0.030 Max Manganese: 2.00 Max Phosphorus: 0.030 Max Density: 7.8 g/cc	Nickel: 8-10% Carbon: 0.030 Max Manganese: 2.00 Max Phosphorus: 0.030 Max Density: 7.8 g/cc	Ni: NL Carbon: 0.120 Max Manganese: 1.00 Max Phosphorus: 0.040 Max Density: 7.8 g/cc	Ni: NL Carbon: 0.6 to 1.25 Manganese: 0.6 to 1.25 Phosphorus: 0.05 Max Density: 7.8 g/cc	Ni: NL Carbon: 0.45 to 0.75 Manganese: 0.35 to 1.20 Phosphorus: 0.05 Max Density: 7.4 g/cc	Ni: NL Carbon: 0.08 to 0.14 Manganese: 1.20 to 1.50 Phosphorus: 0.035 Max Density: 7.4 g/cc
Brightness	Very Very High	Very High	Less Bright	Average	Above Average	Average
Surface Finishing	Very Smooth, Shiny, and Bright surface due to (0.030% Max) and Nickel 8%	Very Smooth and Shiny and Bright Surface due to (0.030% Max) and Nickel 8%	Very Smooth and Dull Surface as 0.12% Carbon and 0.5% Mn and no presence of Nickel	Smooth Surface and Contamination Free due to Carbon	Carbon Steel is an excellent choice for shot peening and cleaning applications.	Low variety of cuts available for various industrial applications
Application	Specially used in Food Grade Product, Aluminum components, Alloys, Wheel rims, Engine blocks, Aluminum Sections, Motor Cast, Aluminum Parts, Engine Blocks, Aluminum parts, Stainless Steel Castings, Pipes & fittings, Brass & Bronze items, electrical components & casting. Also used for Aluminum, Zinc, Copper, and Zinc surface finishing.	Aluminum components, Manganese Base Blasting, Bright Components, Food Grade Equipments, Automotive Parts.	Aluminum components and Furniture Parts, Surface Finishing, Surface Preparations	Degreasing, Decaling, Paint Removing, Cleaning, Blasting	Steel billets, cylinder, shot blasting, Bright Finishing, Cleaning, Deburring, Rust Removing, Coating Removal, Cutting, Cleaning, Burn Mark Removing	Forgings, Heat Treated Parts, Weldments, Stainless Steel, Descaling, Roughening, Surface Preparation, Deburring, Deflashing, Burnout, Shot Peening, Shaping

Scroll horizontally to compare all grades.

Enquire About Steel Shots and Steel Grits See Applications

You may also need

Related Products

Non-Ferrous Copper Cut Wire Shots

Copper Cut Wire Shots

It is used to clean parts where conductivity is very important. Also used for paint removal on tooling, paint hooks etc.

Carbon Steel Cut Wire Shots

Carbon steel cut wire shots are widely used in foundry, forging and automotive industries for cleaning, deburring, descaling, shot peening and surface improvement.

Stainless Steel Cut Wire Shots

Stainless steel cut wire shots are used for shot blasting on investment castings, aluminum die castings, brass components and other metals on which carbon contamination is harmful.

Partner with Shiv Impex for reliable industrial solutions!

Tell us your substrate, finish requirement and volume — we will recommend the right grade and send a quotation.

Get a Quote Call +91 9824966869